# HG changeset patch # User holger@hoho.dyndns.org # Date 1207756958 -7200 # Node ID b1d2c5ed0d7b5ea8fa3b1aca13eede51a9e9b45a # Parent 0b7c249ef9fbaee48287b6721cba1c2a183f298d initial skeleton diff -r 0b7c249ef9fb -r b1d2c5ed0d7b net-misc/rabbitmq/rabbitmq-1.3.0.ebuild --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/net-misc/rabbitmq/rabbitmq-1.3.0.ebuild Wed Apr 09 18:02:38 2008 +0200 @@ -0,0 +1,169 @@ +# Copyright 1999-2008 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +# NOTE: The comments in this file are for instruction and documentation. +# They're not meant to appear with your final, production ebuild. Please +# remember to remove them before submitting or committing your ebuild. That +# doesn't mean you can't add your own comments though. + +# The 'Header' on the third line should just be left alone. When your ebuild +# will be committed to cvs, the details on that line will be automatically +# generated to contain the correct data. + +# The EAPI variable tells the ebuild format in use. +# Defaults to 0 if not specified. The current PMS draft contains details on +# a proposed EAPI=0 definition but is not finalized yet. +# Eclasses will test for this variable if they need to use EAPI > 0 features. +# Ebuilds should not define EAPI > 0 unless they absolutely need to use +# features added in that version. +#EAPI=0 + +# inherit lists eclasses to inherit functions from. Almost all ebuilds should +# inherit eutils, as a large amount of important functionality has been +# moved there. For example, the $(get_libdir) mentioned below wont work +# without the following line: +inherit eutils +# A well-used example of an eclass function that needs eutils is epatch. If +# your source needs patches applied, it's suggested to put your patch in the +# 'files' directory and use: +# +# epatch ${FILESDIR}/patch-name-here +# +# eclasses tend to list descriptions of how to use their functions properly. +# take a look at /usr/portage/eclasses/ for more examples. + +# Short one-line description of this package. +DESCRIPTION="This is a sample skeleton ebuild file" + +# Homepage, not used by Portage directly but handy for developer reference +HOMEPAGE="http://foo.bar.com/" + +# Point to any required sources; these will be automatically downloaded by +# Portage. +SRC_URI="ftp://foo.bar.com/${P}.tar.gz" + +# License of the package. This must match the name of file(s) in +# /usr/portage/licenses/. For complex license combination see the developer +# docs on gentoo.org for details. +LICENSE="" + +# The SLOT variable is used to tell Portage if it's OK to keep multiple +# versions of the same package installed at the same time. For example, +# if we have a libfoo-1.2.2 and libfoo-1.3.2 (which is not compatible +# with 1.2.2), it would be optimal to instruct Portage to not remove +# libfoo-1.2.2 if we decide to upgrade to libfoo-1.3.2. To do this, +# we specify SLOT="1.2" in libfoo-1.2.2 and SLOT="1.3" in libfoo-1.3.2. +# emerge clean understands SLOTs, and will keep the most recent version +# of each SLOT and remove everything else. +# Note that normal applications should use SLOT="0" if possible, since +# there should only be exactly one version installed at a time. +# DO NOT USE SLOT=""! This tells Portage to disable SLOTs for this package. +SLOT="0" + +# Using KEYWORDS, we can record masking information *inside* an ebuild +# instead of relying on an external package.mask file. Right now, you should +# set the KEYWORDS variable for every ebuild so that it contains the names of +# all the architectures with which the ebuild works. All of the official +# architectures can be found in the keywords.desc file which is in +# /usr/portage/profiles/. Usually you should just set this to "~x86". The ~ +# in front of the architecture indicates that the package is new and should be +# considered unstable until testing proves its stability. So, if you've +# confirmed that your ebuild works on x86 and ppc, you'd specify: +# KEYWORDS="~x86 ~ppc" +# Once packages go stable, the ~ prefix is removed. +# For binary packages, use -* and then list the archs the bin package +# exists for. If the package was for an x86 binary package, then +# KEYWORDS would be set like this: KEYWORDS="-* x86" +# DO NOT USE KEYWORDS="*". This is deprecated and only for backward +# compatibility reasons. +KEYWORDS="~x86" + +# Comprehensive list of any and all USE flags leveraged in the ebuild, +# with the exception of any ARCH specific flags, i.e. "ppc", "sparc", +# "x86" and "alpha". This is a required variable. If the ebuild doesn't +# use any USE flags, set to "". +IUSE="gnome X" + +# A space delimited list of portage features to restrict. man 5 ebuild +# for details. Usually not needed. +#RESTRICT="strip" + +# Build-time dependencies, such as +# ssl? ( >=dev-libs/openssl-0.9.6b ) +# >=dev-lang/perl-5.6.1-r1 +# It is advisable to use the >= syntax show above, to reflect what you +# had installed on your system when you tested the package. Then +# other users hopefully won't be caught without the right version of +# a dependency. +DEPEND="" + +# Run-time dependencies. Must be defined to whatever this depends on to run. +# The below is valid if the same run-time depends are required to compile. +RDEPEND="${DEPEND}" + +# Source directory; the dir where the sources can be found (automatically +# unpacked) inside ${WORKDIR}. The default value for S is ${WORKDIR}/${P} +# If you don't need to change it, leave the S= line out of the ebuild +# to keep it tidy. +#S="${WORKDIR}/${P}" + +src_compile() { + # Most open-source packages use GNU autoconf for configuration. + # The quickest (and preferred) way of running configure is: + econf || die "econf failed" + # + # You could use something similar to the following lines to + # configure your package before compilation. The "|| die" portion + # at the end will stop the build process if the command fails. + # You should use this at the end of critical commands in the build + # process. (Hint: Most commands are critical, that is, the build + # process should abort if they aren't successful.) + #./configure \ + # --host=${CHOST} \ + # --prefix=/usr \ + # --infodir=/usr/share/info \ + # --mandir=/usr/share/man || die "./configure failed" + # Note the use of --infodir and --mandir, above. This is to make + # this package FHS 2.2-compliant. For more information, see + # http://www.pathname.com/fhs/ + + # emake (previously known as pmake) is a script that calls the + # standard GNU make with parallel building options for speedier + # builds (especially on SMP systems). Try emake first. It might + # not work for some packages, because some makefiles have bugs + # related to parallelism, in these cases, use emake -j1 to limit + # make to a single process. The -j1 is a visual clue to others + # that the makefiles have bugs that have been worked around. + emake || die "emake failed" +} + +src_install() { + # You must *personally verify* that this trick doesn't install + # anything outside of DESTDIR; do this by reading and + # understanding the install part of the Makefiles. + # This is the preferred way to install. + emake DESTDIR="${D}" install || die "emake install failed" + + # When you hit a failure with emake, do not just use make. It is + # better to fix the Makefiles to allow proper parallelization. + # If you fail with that, use "emake -j1", it's still better than make. + + # For Makefiles that don't make proper use of DESTDIR, setting + # prefix is often an alternative. However if you do this, then + # you also need to specify mandir and infodir, since they were + # passed to ./configure as absolute paths (overriding the prefix + # setting). + #emake \ + # prefix="${D}"/usr \ + # mandir="${D}"/usr/share/man \ + # infodir="${D}"/usr/share/info \ + # libdir="${D}"/usr/$(get_libdir) \ + # install || die "emake install failed" + # Again, verify the Makefiles! We don't want anything falling + # outside of ${D}. + + # The portage shortcut to the above command is simply: + # + #einstall || die "einstall failed" +}